Shop
Showing 649–672 of 817 resultsSorted by popularity
-
Arduino Shields
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EB3012 -
Interfacing Modules
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
- 5V Tolerant Inputs.
- Supports Hot Insertion.
- I2C Bus and SMBus Compatible.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
SKU: n/a -
-
Arduino Shields
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
SKU: n/a -
Display Devices
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
SKU: n/a -
-
BMS Module / Battery Charging Module
2S 4A BMS Li-Ion Battery Protection Board With Nickel Strip
- Battery Configuration: 2-series (2S) lithium-ion battery packs
- Maximum Continuous Discharge Current: 4A
- Protection Features: Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection
- Dimensions: Typically specified in millimeters (mm), e.g., 50mm x 20mm x 3mm
- Material: Usually made of durable PCB (Printed Circuit Board) material
- Included Components: Pre-welded nickel strip for easy connection
- Application: Designed for managing and protecting small-scale lithium-ion battery packs
SKU: n/a -
RF/NRF/RFID Modules
315MHZ Four Key Wireless Smart Car Remote Control Kit
- No. of the channel: 4
- Operating mode: Non-Locking
- Receiver Operating voltage: DC 5V.
- Receiver sensitivity is: -98dB.
- Transmitter Operating voltage: DC 12V
- Transmitting frequency: 315 MHZ.
- Transmitter Operating current: 10mA at 12V.
- TransmitterRadiated power: 10mW at 12V.
- Transmission distance (m): 3 to 5.
SKU: n/a -
-
Amplifier Modules
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
-14%
Amplifier ModulesJQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
- MP3 file format:
- support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (KHZ): 8/11.025/12/16/22.05/24/32/44.1/48
- support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V-5V (best 4.2V);
- Rated current: 20ma
SKU: EB1064 -
Current & Voltage Sensors
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
Current & Voltage SensorsCJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
SKU: EB1080
