The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8×8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7219 also allow the user to select codeB decoding or no-decode for each digit. The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scanlimit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on.
Features:-
- 10MHz Serial Interface
- Individual LED Segment Control
- Decode/No-Decode Digit Selection
- 150µA Low-Power Shutdown (Data Retained)
- Digital and Analog Brightness Control
- Display Blanked on Power-Up
- Drive Common-Cathode LED Display
- Slew-Rate Limited Segment Driver
- 24-Pin DIP and SO Packages
Specification:-
| Parameter | Value |
| Voltage (with respect to GND)- V+ | -0.3V to 6V |
| DIN, CLK, LOAD, CS | -0.3V to 6V |
| All Other Pins | -0.3V to (V+ + 0.3V) |
| Current DIG 0–DIG 7 Sink Current | 500mA |
| SEG A–G, DP Source Current. | 100mA |
| Operating Temperature Ranges | 0°C to +70°C |
4Pin XY2500 Pluggable Screw Terminal Block -Right Angle - 5.08mm Pitch Set of M+F
Header Pins 40×1 Right Angle – 2.54mm Pitch – Brass
P31 Small Float Level Control Switch Plastic Float Switch
DS75176 RS-422/RS-485 Interface IC 




There are no reviews yet.