Electronics Modules
Showing 49–72 of 114 resultsSorted by popularity
-
Buck/ Boost Converters
Mini 360 Step-Down Buck Converter Power Module
- Module: Non-isolated step-down module (BUCK)
- Input voltage: DC 4.75V-23V
- Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
- Rectification: Synchronous rectification
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no-load)
SKU: EB3055 -
Buzzer & Microphone, Other Modules
ISD1820 Recording Module Voice Board with Mic
- The main chip: ISD1820.
- Operating Voltage: DC 3V-5V.
- Loudspeaker: 8 ohm, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
SKU: n/a -
Interfacing Modules
USB to RS485 TTL Serial Converter Adapter FT232
- Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
- Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
- Interface Protection: TVS tube protection, USB self-recovery protection
- Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
- It can be up to 32 devices on the bus.
SKU: EB2047 -
-
-
Interfacing Modules
MAX485 TTL to RS485 Converter Module
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
SKU: EB3098 -
Interfacing Modules
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
SKU: EB2057 -
Amplifier Modules, Interfacing Modules
TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
Amplifier Modules, Interfacing ModulesTXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx: 26 x 15 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-
- 3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
SKU: EB1008 -
Interfacing Modules
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
- 5V Tolerant Inputs.
- Supports Hot Insertion.
- I2C Bus and SMBus Compatible.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
SKU: n/a -
BMS Module / Battery Charging Module
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
-18%
BMS Module / Battery Charging Module3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
SKU: n/a
