Electronics Modules
Showing 49–72 of 109 resultsSorted by popularity
-
Buck/ Boost Converters
AMS1117 5V Step-Down Power Supply Module
- Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
SKU: n/a -
Amplifier Modules
TDA2030A 6-12V 18W Audio Amplifier Module
- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: EB1256 -
Buzzer & Microphone, Other Modules
ISD1820 Recording Module Voice Board with Mic
- The main chip: ISD1820.
- Operating Voltage: DC 3V-5V.
- Loudspeaker: 8 ohm, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
SKU: n/a -
-
Buck/ Boost Converters
AMS1117 3.3V Step-Down Power Supply Module
- Input: DC 4.0V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V (+-0.05v error), 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
SKU: n/a -
Buck/ Boost Converters
LM2596 2A Buck Step-Down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
Buck/ Boost ConvertersLM2596 2A Buck Step-Down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
- Input Voltage(VDC): 4 ~ 40.
- Output Voltage(VDC): 1.3 ~ 37.
- Output Current: 2A Rated, ( 3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
SKU: n/a -
Amplifier Modules, Interfacing Modules
TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
Amplifier Modules, Interfacing ModulesTXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx: 26 x 15 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-
- 3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
SKU: n/a -
Interfacing Modules
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
SKU: n/a -
-
BMS Module / Battery Charging Module
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
BMS Module / Battery Charging Module3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
SKU: n/a -