DS18B20 Water Proof Temperature Probe – Black (1m)

Availability:

114 in stock

Share On:

  1. A probe by new original installation import DS18B20 temperature sensor chip.
  2. Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
  3. Stainless steel tube encapsulation waterproof moistureproof prevent rust.
  4. Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
  5. Without the external components, the unique single bus;

55.00 (Exc. GST)

114 in stock

Compare

DS18B20 Water Proof Digital Temperature Sensor Probe

DS18B20 Water Proof Digital Temperature Sensor Probe is a 1 Meter Long Waterproof, sealed, and pre-wired. It is very handy for when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over long distances. These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex and requires a bunch of code to parse out the communication. When using with microcontroller put a 4.7k resistor to the sensing pin, which is required as a pullup from the DATA to the VCC line. This Product Known as DS18B20, Sensor, Temperature Sensor, Temperature Sensor Module, DS18B20, DS18B20 Water Proof Temperature Sensor Probe, Sensor, Temperature Sensor, Water Proof Temperature Sensor Probe, Temperature & Humidity Sensor.

Wired connection:

  • Red: VCC/VDD
  • Yellow/White: DATA
  • Black: GND

Features/Specs:

  • Model: DS18B20
  • Operating Voltage: 3 ~ 5.5VDC
  • Operating Temperature: -55 to 125°C
  • Each pin uses a heat-shrinkable tube to prevent short circuits, internal sealing glue, waterproof, moistureproof.
  • Stainless steel tube encapsulation waterproof moistureproof prevents rust.
  • Stainless steel tube 6mm diameter by 30mm long
  • Contains DS18B20 temperature sensor
  • 9 to 12-bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into the chip
  • Multiple sensors can share one pin
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • Without the external components, the unique single bus.
  • Accuracy: ±0.5°C
  • Cable Length: 1 Meter

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.